Encoder Configuration - VBrick 9000 Admin Manual

Encoder Configuration

The options in the
configure encoder video and audio parameters. These parameters should not be changed
except by knowledgeable systems administrators.
Keep in mind:
• VBAdmin has a read-only
configuration changes.
• When viewing the images in Online Help, many of the configuration options for the
encoder are mutually exclusive. This means that depending on which options you select,
you may see new fields or you may not see previously visible fields. All options, however,
are fully explained in the text.
• Any video/audio configuration change will take approximately 20 seconds after you click
the button. If you see the message Previous Apply has not finished, try again, wait 15
Apply
seconds then click
• Be aware that some video and audio configuration changes can cause a 15 to 20 second
interruption on all channels every time you click
on units with multiple slots and channels, wait until you have configured changes on all
slots and channels, and then click
Encoder Configuration Topics:

Global
Video
Audio
Programs
Streams
Transmitters
Servers
VBrick 9000 Encoder Admin Guide
menu are used by system administrators to
Encoder Configuration
mode and an interactive
View
.
Apply
.
Apply
Chapter 3
mode where you can make
Edit
. To avoid intermittent disruptions
Apply
49