Monitor Storage Information - VBrick 9000 Admin Manual

Monitor System Page Topics:

Monitor System Information

Monitor Storage Information

Monitor Manufacturing Information
Monitor System Restarts
Monitor Storage Information
To monitor

1. Navigate to
This page has status indicators and controls in two columns for
media respectively if present.
Field
State
Type
Total Space
Free Space
Format Status
Format Storage
Reset
Safely Remove Device External storage only. Click
Check
Monitor System Page Topics:

Monitor System Information
142
:
Storage Information
> >
Monitor System Storage Information
Description
• Ready | Not Ready
• Not Present | Not Present. If you click
remove a device, Not Present means it is safe to remove.
Displays manufacturer information.
Total space available on device.
Total free space available on device.
• None – device has not been formatted.
• Formatted – device has been formatted.
Click button and confirm to format the storage device for FAT32.
Be aware that you will lose all data if you format the device.
Resets the storage device. This allows a drive that was ejected but
not physically reseated to be recognized.
removing external USB device.
Performs a check of the drive and file system. The
(See: Additional System Settings) must be set to
Mode
to run this test.
section.
and
Internal External
(see below) to
Eject
and wait for message before
Eject
Operational
© 2015 VBrick Systems, Inc.
storage
Diagnostics