Domain Name Server Settings; Network Time Synchronization Settings - VBrick 9000 Admin Manual

Domain Name Server Settings

To access the

1. Navigate to
Field
Primary Server IP Address
Secondary Server IP Address This is the secondary server used for DNS.
Default Domain Extension
Network Page Topics:

Network
Domain Name Server Settings

Network Time Synchronization Settings

External FTP Server Settings
Network Time Synchronization Settings
To access the

1. Navigate to
These fields are used to synchronize network time using the host name or IP address of a
known server to provide a synchronized time for all encoders in the network. Note that
Network Time Synchronization is disabled by default and will auto reboot the unit if enabled.
If enabled, and the NTP time is four minutes greater than or less than the current system
time, the unit will reboot twice.
Field
Network Time Protocol
16
fields:
Domain Name Server
>
System Configuration
Description
This is the primary server used for DNS.
This is the domain name used for DNS.
Network Time Synchronization
>
System Configuration
Description
Check to enable network time synchronization. Default =
Disabled.
>
Network Domain Name Server
fields:
>
Network Network Time Synchronization
section.
section.
© 2015 VBrick Systems, Inc.