Disable Presenter Mode Access From The Login Screen - VBrick 9000 Admin Manual

Note: If access without log in is enabled, Presenter Mode may also be accessed by
direct URL as well by accessing the Presenter encoder's name or IP address. The full
URL is: http://<presenter encoder name or IP>/presenter.htm
If Presenter Mode has not been enabled, the
on the Login screen and logging in will be required. An admin may disable this button so that
log in is required. (See: Disable Presenter Mode Access from the Login Screen)
Presenter Mode must then be accessed by clicking on the
the VBAdmin interface. See: Access Presenter Mode and Controls.
For information on how to use the Presenter Mode interface itself, see: Presenter Mode User
Guide.

Disable Presenter Mode Access from the Login Screen

The ability to access Presenter Mode from the Login screen without logging in is enabled by
default. To remove this ability you must disable the
Login screen.
To disable Presenter Mode access from the Login screen:

1. Navigate to
2. Click the
Edit
3. Deselect the
4. Click
Apply
5. The
Manage Presentation
Mode will now have to be accessed after logging in.
118
>
System Configuration
button.
Allow Presenter Control Without Login
> .
Finish Edit
button will no longer appear on the Login screen. Presenter
Manage Presentation
Manage Presentation
Manage Presentation
Advanced Configuration
checkbox.
button will not be present
button within
button from the
> Security.
© 2015 VBrick Systems, Inc.