Configure A New Rtsp Url - VBrick 9000 Admin Manual

To access the

1. Navigate to
Field
URL Name
URL
Transport
Trash | Edit

Configure a New RTSP URL

You must be in
Edit
Field
Name
Data Transport
URL
114
fields:
RTSP URLS
>
Receiver Configuration
Description
The name that is used to describe your custom RTSP URL.
The RTSP URL.
The data transport type; UDP is only available at this time.
Use the trash and pencil icons to delete and edit the selected
RTSP URL respectively.
mode to configure a new RTSP URL..
Description
The name that is used to describe your custom RTSP URL. The
same best practice that is used for Receivers should be considered
when creating your own RTST URLs. That is, consider
developing a naming convention for your streams based on their
locations or what content they serve (such as "news" or
"weather") if applicable so that there is no confusion when the
source is selected on the layout pane.
The data transport type; UDP is only available at this time.
The RTSP URL. If your RTSP requires authentication, the syntax
to enter a user name and password is:
This is the only format that VBrick supports at this time.
.
RTSP URLs
testing:test@IP
© 2015 VBrick Systems, Inc.