To view the EULA after it has been accepted, get the following file via FTP:
C:\AcceptedEula.txt
Home Page
The
page provides a snapshot of the current status of the encoder. All text fields are
Home
read-only and there are no editable fields on this page.
The colored LED indicators in the bottom middle of the page give you a quick snapshot of
the health and status of the encoder. See the Home Page LEDs topic for an explanation of
what they mean.
Field
Header Panel
Logged in as
System IPv4 Address
System Resolved IPv6
Address
System Description
System Name
System Location
System Contact
System Up Time
Total System Up Time
VBrick 9000 Encoder Admin Guide
Description
To quickly identify the unit, this panel shows the Host Name
(from the System Configuration > Network page). The default
Host Name is the MAC Address (circled below).
The user who is currently logged in.
Read from the System Configuration > Network page.
Read from the System Configuration > Network page.
Read from the Monitor > Monitor the System page.
Read from the System Configuration > General page.
Read from the System Configuration > General page.
Read from the System Configuration > General page.
Read from the Monitor > Monitor the System page. Refreshed
every 60 seconds.
Read from the Monitor > Monitor the System page. Refreshed
every 60 seconds.
Introduction
3