VBrick 9000 Admin Manual page 120

Field
Enable Receiver
Available Programs
Program Details
112
Description
Check box to enable|disable receiver. Enabling Receivers will
make the network streams in the
selectable as a video area source when customizing a layout for
Presenter Mode. See: Customize Presenter Mode Layouts.
Click the button to refresh list of available programs.
Refresh
During program set up, consider developing a naming convention
as a best practice for your business. The encoder will be
displaying all remote SAP messages here from various encoders.
If a naming convention is not developed, as seen in the image
above, figuring out which one to use as a network source will be
difficult. Consider naming your streams based on their locations
or what content they serve (such as "news" or "weather") if
applicable so that there is no confusion when the source is
selected on the layout pane.
Note that if "Encrypted" appears after the program name, the
stream is encrypted. View the topic on Encryption for details.
Displays the details of the currently highlighted program in
including the currently assigned encryption
Available Programs
key if applicable. The program is not actually selected until you
click . Note: When changing programs, there may be a delay
Apply
of up to 20 seconds on the output device.
list
Available Programs
© 2015 VBrick Systems, Inc.