Feature License
Restore System Configuration
To access the
1. Navigate to
Configuration
This function lets you write configuration parameters from an .xml file to the VBrick
encoder. On a successful restore, all parameters will be saved to flash and the encoder will
reboot. Only administrator-level users and above have "write" privileges. Note that the
VBrick encoder that the configuration file is read from, and VBrick encoder that the
configuration file is written to should be running the same version of code. Mismatched
versions may work but are not supported or guaranteed.
To restore the system configuration from an .xml file:
1. Click the
Choose File
the encoder.
2. Click on the
no validation errors the configuration parameters will be saved to flash memory and the
encoder will reset.
3. If the configuration has validation errors, the file is rejected and the errors are displayed.
You will need to correct the errors and create a valid .xml "read" file as explained above.
Manage Configuration Page Topics:
Reset System Configuration
Read System Configuration
Restore System Configuration
Auto Configuration
Feature License
Auto Configuration
To access the
1. Navigate to
VBrick 9000 Encoder Admin Guide
Restore System Configuration
>
System Configuration
section.
button and navigate to the configuration file you want to write to
button to write the selected file to the VBrick encoder. If there are
Restore
fields:
Auto Configuration
>
System Configuration
fields:
>
Manage Configuration
>
Manage Configuration
System Configuration
Restore System
section.
Auto Configuration
27