Additional System Settings - VBrick 9000 Admin Manual

Additional System Settings

To access the

1. Navigate to
Field
Operational Mode
Presenter Mode
Enabled
Login Message
General Page Topics:

System Identification Settings
System Time Settings
Additional System Settings
System Reset
Front Panel Settings
20
Additional System Settings
>
System Configuration
Description
Indicates the configured operational mode of the encoder. The
Current Operational Mode is shown on the Monitor > Monitor the
System page. The following modes are supported. See Operational
Modes on page 166 for more information.
• Run – Normal operation.
• Diagnostics – User selected mode for running certain VBrick
diagnostics.
Not displayed if presentation features have already been enabled.
Enables Presenter Mode and presentation features on the encoder.
Requires the purchase of a Feature License and its application
before these features will be available.
Enabling Presenter Mode will reboot the encoder. This reboot will
also reset a number of settings, referred to as "Default All".
Parameters such as video, streams, transmitters, and servers will be
reset. Non-streaming parameters such as networking and passwords
will not be reset.
See: Feature License for information on how to install a license file.
See: Presentation Features Overview for details on how to use
Presenter encoder features.
Enter up to 300 characters of alphanumeric text and special
characters (except quotation marks) that will be displayed on the
login page. It will be displayed in the highlighted area above.
fields:
>
General Additional System Settings
section.
© 2015 VBrick Systems, Inc.