VBrick 9000 Admin Manual page 70

Field
Rate & Enable
Template
62
Description
Rate 1 is enabled by default. At least one rate must always be
configured.
This read-only field shows the template (if
any) that is currently applied. The templates
provide an optimized combination of
settings that have been configured and
tested at VBrick. The templates available
when you click
Load Template
depending on your encoder model (1, 2, or
4 channels). See Table 1 on page 68 for a
list of all templates and settings. If a
template is applied it will display the
template name (e.g.
750Kbps, SDp30/25
(if you made changes after
Custom Settings
initially selecting a template). Select
to clear a "Custom
Template > None
Settings" message. Select
to copy the "Advanced Rate Settings"
Rates
only for the selected rate to all of the other
rates on the same Slot and Channel.
will vary
) or
Load
Copy to Other
© 2015 VBrick Systems, Inc.