VBrick 9000 Admin Manual page 166

Receiver
Field
Status
Program Name
Program Info
Program Origin
Program Stream
Connection Duration Number of days (plus the number of hh:mm:ss) the connection has
Network Statistics
Network Statistics show information about the streams being received by the decoder
including addresses and ports, frame and byte counts, dropped frames, and jitter queue
performance. The Statistics automatically reset when you start or change the connection or
you can manually reset with the
mode). Click on the
158
Description
• Connected – The decoder is connected to the encoder and is
receiving packets associated with the program.
• Connecting – The decoder is in the process of connecting to the
encoder.
• No Announce – A SAP has not been received for the configured
program.
• Disabled – The decoder is disabled on the Decoder
Configuration > Receivers page.
• Inactive – The decoder is enabled but not actively decoding a
stream.
Name of the received stream.
Information description from Encoder Configuration > Programs
page.
Source IP of the encoder.
Transmitter number (1–25) of the received stream.
been active.
Reset Counters
button to show or hide extra details.
Advanced Statistics
button at the bottom of the page (in edit
© 2015 VBrick Systems, Inc.