Monitor Decoder Status; Monitor Receivers/Video/Audio - VBrick 9000 Admin Manual

FTP Status and Control
This panel is typically used to manually FTP any files on the encoder's internal hard drive (or
on an external USB drive) to the external FTP server defined on the System Configuration >
Network page.
Field
Filename
Add File To FTP
Queue
Add File To FTP
Queue Then Delete
Remove File From
FTP Queue
Files in FTP Queue
FTP Queue
Current FTP File
Transfer
Last FTP File
Transfer

Monitor Decoder Status

Monitor Receivers/Video/Audio

To monitor

1. Navigate to
VBrick 9000 Encoder Admin Guide
Description
The fully-qualified path to a file. For example:
D:/<filename>.ts
E:/<filename>.ts
Click to add the specified file to the FTP queue.
Add File
Click
Add File Then Delete
and then delete from local hard drive.
Click
Remove File
Read-only. The number files currently in the FTP queue.
File Name
File Size
File Time
File Name
FTP Start Time
Bytes Transferred Number of bytes transferred so far.
File Size
FTP Transfer
Status
FTP Read Status
File Name
FTP Start Time
FTP End Time
Bytes Transferred Number of bytes transferred.
File Size
FTP Transfer
Status
FTP Read Status
:
Receivers/Video/Audio
>
Monitor Decoder Status
= the path to a file on the internal hard drive.
= the path to a file on an external hard drive.
to add the specified file to the FTP queue
to remove selected file from FTP queue.
Name of file.
Size of file.
Time the file was created.
Name of file currently being transferred.
Time the FTP transfer was started.
Size of file.
Status (including errors) of transfer to FTP
server.
Status of read (i.e. "get") from file system.
Name of last file transferred.
Time the FTP transfer was started.
Time the FTP transfer ended.
Size of file.
Status (including errors) of transfer to FTP
server.
Status of read (i.e. "get") from file system.
>
Receivers/Video/Audio
Monitor
.
157