Monitor Video Rate - VBrick 9000 Admin Manual

Field
Video State
Detected Video Format
Detected FPS
KLV Status
KLV Bytes Received
KLV Packets Created
KLV Errors

Monitor Video Rate

Field
Actual Bit Rate
Actual Frames per
Second
148
Description
Shows the state of the connected video source.
• Running – video connection is OK.
• Video input problem – video connection is not OK.
• Video mismatch – The video input connection does not
match the Video Format.
Note: If a video source is protected by HDCP (High-bandwidth
Digital Content Protection) it cannot be streamed and this field
will display "Video input problem." See "HDCP Support" in the
Encoder Release Notes for more about HDCP.
Indicates what is actually connected. This is useful for
determining configuration mismatches.
Shows the actual Frame Rate in decimal. This is useful for
configuring some decoders.
Shown if KLV is enabled.
Shown if "ESD to LDS" selected for KLV.
Shown if "ESD to LDS" selected for KLV.
As displayed.
Description
Measured rate in bits per second of the encoded video stream
being created by the encoder.
Measured rate in frames per second of the encoded video
stream being created by the encoder. This rate is rounded down
and may indicate 0 for frame rates less than 1 per second.
© 2015 VBrick Systems, Inc.