Ping Test Result; Ping Test Setting; Traceroute Test - VBrick 9000 Admin Manual

Ping Test Result

Field
Response Counter
Timeout Counter
Resolved IP Address IP Address of destination.
Ping Result

Ping Test Setting

Field
Destination
Number of Packets
PDU Size
Transmit Interval (sec.) In seconds (default is sending the packets in 1 second intervals).
Transmit Timeout (sec.) The length of time, in seconds, before the test times out, in the

TraceRoute Test

To conduct a

1. Navigate to
The Internet is a complex aggregation of network hardware connected by gateways. Tracking
the route packets follow or finding a gateway where the packets are being discarded is
difficult. The Trace Route test attempts to trace the route an IP packet follows to a specified
Internet host. This test utilizes the Time To Live (TTL) field in the IP header to allow
intermediate nodes to be "discovered" via Internet Control Message Protocol (ICMP).
Intermediate hops are discovered by launching probe packets with a small TTL and then
164
Description
Counts the successful responses.
Counts the response timeouts.
Host is alive/not alive.
Description
IP Address (IPv4), Host Name, or IPv6. Cannot be blank.
Number of packets to send for the test (default = 4).
Protocol Description Unit size of packets, in bytes (default = 64).
event the target device fails to respond.
:
Traceroute Test
>
Troubleshoot Traceroute Test
.
© 2015 VBrick Systems, Inc.