Configure Vbdownload Folders - VBrick 9000 Getting Started Manual

3. When the
Maintenance Complete
4. Go to
Start > All Programs > VBrick > VBDirectory
VBDirectory program will show all VBrick encoders available for upgrade.
5. Select the device to be updated by highlighting the name and then click the
button. (If the user name and password are not set, a dialog box will appear and you will
need to configure the encoders's username and password (default for both =
6. In the VBDownload window, if you installed the release to the default directory, that
directory will be auto-selected in the
that contains the unzipped files from the release package.
7. Select a
Revision
VBDownload is
which release components need to be downloaded. When prompted, press
VBDownload to upgrade the suggested components. This may take several minutes.
8. When the download completes, reboot the encoder using the
and follow the prompts.
9. Note that part of the upgrade takes place during the first boot after the download and
may take up to 5 minutes. The upgrade is complete when you can login via VBAdmin or
CLI, or when its name is refreshed in VBDirectory.
10. When done close the window or click
Tip: To verify the download has successfully installed, check the
Revision

Configure VBDownload Folders

The VBDownload application is used to upgrade VBrick encoders. When you click on the
setup executable, the application files are automatically installed in
Files\VBrick\VBrick 9000
If you have a mixture of 6000, 7000, and 9000 devices present, the application will default to
the
VBrick 9000
creating a new shortcut for VBDownload that uses
32
page is displayed, click
and click to start the download. Since the default mode of
OK
Intelligent Download
field on the VBAdmin "Welcome" page.
.
folder. Experienced VBrick users can modify this default behavior by
Finish
to start the management utility. The
. If not,
Revision Folder
the utility will query the VBrick to determine
.
Exit
as the default folder.
VB6000
.
Upgrade
).
admin
to the directory
Browse
to allow
OK
radio button
Reset Unit
Application Code
Program
© 2016 VBrick Systems, Inc.