Setting The Registration Mark Automatic Detection - GRAPHTEC FC9000 Series User Manual

Setting the registration mark automatic detection

When setting the registration mark automatic detection to on, the following operations will be performed.
registration mark automatic detection, the registration mark is automatically scanned without moving the detect
start position of tool.
Supplement
When setting to OFF, the operation above is not performed.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING setting screen (1/3) is displayed.
3
Press the POSITION ( ) key.
ARMS SETTING screen (2/3) is displayed.
4
Press the [2] key (MARK AUTO SCAN).
MARK AUTO SCAN screen is displayed.
5
Press the [1] key (ON) or the [2] key (OFF).
5-23