Setting The Registration Mark Size - GRAPHTEC FC2250 Series User Manual

4.5 Setting the Registration Mark Size

This function allows you to specify the size of the registration marks drawn on the medium.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE
MARK
BUFFER CLR.
SPEED
(3) Press the [F1] key (MARK) to dsplay the regstraton mark functons selecton menu.
FORCE
MODE
TYPE OTHER SETUPS
SPEED
(4) Press the [F4] key (OTHER SETUPS) to dsplay the menu shown below.
FORCE
SIZE
ORG OFT
SPEED
(5) Press the [F1] key (SIZE) to display the menu for setting the registration mark size.
FORCE
MARK SIZE
SPEED
Use the [ ] or [
Setting range: 5 to 20 (mm)
Registration mark pattern 1,
Mirror 1
Set value
(6) Press the [PAUSE] key to cancel PAUSE mode.
OFFSET
TOOL U/D
VIEW
QUALITY
OFFSET
DIST ADJ
QUALITY
OFFSET
ADJ. SENS
SENS OPT
QUALITY
OFFSET
15 mm
QUALITY
] key to change the numerc value, and then press the [ENTER] key to confirm your selection.
Registration mark pattern 2,
Mirror 2
Set value
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
Registration mark pattern 3
Set value
4-9