GRAPHTEC FC9000 Series User Manual page 303

When using Cutting Master 4
1
In Adobe Illustrator, select "Cutting Master 4" - "Cut/Plot"
from the File menu.
In CorelDRAW, select "Launch" - "Cut/Plot (CM4)" from
the tool bar.
* If using CorelDRAW version X7 or earlier, select from
the application launcher.
Before selecting the Cut/Plot, set the layer of printing
data to Hide.
2
"Cut/Plot" screen is displayed.
Check the "Hold in list".
Press the "Send".
Supplement
When the "Cut/Plot" screen is displayed for the
Follow the instructions on the screen to select
the model name to use.
For USB connection, select the "Graphtec
USB".
For network connection, select the "TCP/IP"
and then enter the IP address of the cutting
plotter.
The explanation here is limited to using a
personal computer instead of the server for
the data link server.
14-29