GRAPHTEC FC9000 Series User Manual page 208

3
Press the POSITION ( ) key.
INTERFACE screen (2/3) is displayed.
4
Press the [2] key (RS-232C).
RS-232C setting screen is displayed.
5
Press the [1] key (BAUD RATE).
BAUD RATE screen is displayed.
6
Press the POSITION (
setting value.
7
The baud rate is selected and it will return to RS-232C setting screen.
8
Press the [2] key (DATA BIT).
DATA BIT screen is displayed.
9
Press the [1] key (8 BIT) or the [2] key (7 BIT).
The data bit will be selected and it will return to RS-232C setting screen.
) keys and increase or decrease the
9-12
Supplement
It will return to INTERFACE screen (2/3) without
changing the settings when you press the [ESC]
key (CANCEL).
Supplement
Baud rate can be selected from 19200, 9600,
4800, 2400, 1200, 600 or 300.
Supplement
Match it to the software you are using.
Supplement
Match it to the software you are using.
It will return to RS-232C setting screen (2/3)
without changing the settings when you press
the [ESC] key (PREVIOUS).