GRAPHTEC FC9000 Series User Manual page 376

7
Increase or decrease the setting value using POSITION (
key.
8
The feed length will be selected and it will return to AUTO PRE FEED
screen.
9
Setting will be confirmed and it will return to MEDIA setting screen (1/2).
10
Press the [PAUSE/MENU] key.
It returns to default screen.
)
Supplement
The feed length can be set in units of 0.1 m.
You can set the range between 0.5m and 50.0
m.
Press the [SLOW] key to change the setting
digits.
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
Supplement
When AUTO PRE FEED is set, the
displayed on the right side of the screen. See
"How to Use Control Panel".
18-18
mark is