Setting Automatic Registration Mark Position Detection - GRAPHTEC CELITE-50 User Manual

Setting Automatic Registration Mark Position Detection

When the position of the tool is close to the registration mark scan starting area while in a state where "AUTO
MARK SCAN" is set to "ON", the registration mark positions will be automatically searched when starting
automatic scanning of the registration marks.
If the current position of the tool is far away from the registration mark scan starting area, the search may take
time or the process may even end in an error due to not being able to find the registration marks.
The above operation will not be performed when this item is set to "OFF".
Registration Mark Type 1
Y
X
1.
From the "MENU" screen, open the "ARMS
1/2" screen and proceed to the "ARMS 2/2"
screen.
2.
Select "ON" or "OFF" for "AUTO MARK
SCAN".
Registration Mark Type 2
Y
X
Registration Mark
Scan Starting Area
Chapter 5 Detailed Settings
Registration Mark
Scan Starting Area
5-19