Notes On Plotting Data - GRAPHTEC FC9000 Series User Manual

About using strong resilient media.
The roll media taken up may swell and affect the take-up operation.
If the roll media swells, put tension on the roll media by inserting a paper core with the same width into the
slack part of the roll media. The swell may stop. Be sure to try it before using it.
When a heavy paper core is used, the media deviations may occur. Please use a light paper core that can
take up slack.
media
Paper core

Notes on plotting data

When taking up, do not cut the perforations.
In consideration of the overlap of the support media, print a design with a margin of about 500 mm on the
leading edge of the roll media.
When creating a data, the length of one data should be within 1.2m.
Set the number of data that can fit on a roll of up to 20 m for the amount of one take-up.
18-3