GRAPHTEC FC9000 Series User Manual page 236

4
Press the [3] key (BARCODE CUT).
The following message is displayed.
5
Press the [1] key (STANDARD BARCODE ) or the [2] key
(ROLL PAPER BARCODE ).
The following display is displayed.
<Standard barcode>
6
Press the POSITION (
start mark position.
7
The barcode is scanned. On completing it, the following screen is
displayed.
<Roll paper barcode>
) key to move the tool to the
12-6
Supplement
If the USB memory is not inserted, the
following is displayed.
When the Rotation is set to ON, the following
display is displayed.
When the Mirror is set to ON, the following
display is displayed.
When the Panel Cutting is set to ON, the
following display is displayed.
In the case of a barcode of roll media, the
following will be displayed for the second and
subsequent sheets.
Supplement
If the start mark is not scanned the following
display is displayed.
Check the print result of start mark and the
detect start position etc.