GRAPHTEC FC9000 Series User Manual page 174

9
Press the POSITION (
setting value.
10
11
Press the [4] key (Y=+0.0mm).
12
Press the POSITION (
setting value.
13
TOOL OFFSET ADJ. screen is displayed.
14
Repeat steps 4 to 13 until the misalignment between the two
tools is corrected.
15
screen.
16
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys and increase or decrease the
) keys and increase or decrease the
7-24
Supplement
You can set the range between -3.0 mm and
+3.0 mm.
Supplement
You can set the range between -3.0 mm and
+3.0 mm.
Supplement
It will return to TOOLS SETTING screen (1/4)
without changing the settings when you press
the [ESC] key (CANCEL).