Preparation Of Cutter Plunger; Cutter Plunger Nomenclature - GRAPHTEC FC9000 Series User Manual

2.1

Preparation of Cutter Plunger

This chapter describes the structures and types of the cutter plungers (cutter pens).

Cutter plunger nomenclature

The plotter cuts using a cutter blade mounted in a plunger. There are two different plungers to suit the diameter
mount the cutter blade in the corresponding cutter plunger.
PHP33-CB09N-HS/PHP33-CB15N-HS
Cutter blade
Plunger-cap
PHP35-CB09-HS/PHP35-CB15-HS
Cutter blade
Protective cap
Plunger
Plunger
care.
2-2
CAUTION