Table of Contents
Advertisement
Adjusting for the registration mark scan position
Sensor to scan the registration mark is positioned away from the tip of the tool (pen tip). Therefore, it is
position.
If the registration mark is already marked on the media, scan that registration mark, plot another registration
value.
Reference
There is a restriction on the shape (style) of the registration marks that can be scanned. See "Shape (Pattern) of Registration Mark".
Adjust after plotting the adjustment registration mark
This section describes the steps to plot the registration mark.
Reference
Proceed to "Setting the Position Using ARMS" without plotting the registration mark if the registration mark is already drawn on the
media.
Operation
1
Load white media.
2
(Backward).
3
Press the [PAUSE/MENU] key.
MENU screen is displayed.
Reference
See "Loading Media (Paper or Marking Film)"
for loading white media.
Reference
See "Attaching a Tool" for setting the water-
has been scratched, then it may not scanned.
5-16
Advertisement
Table of Contents
Troubleshooting
