Set The Mark Scan Mode - GRAPHTEC FC9000 Series User Manual

5.2
Setting and Adjustment of ARMS

Set the MARK SCAN Mode

Checking the recommended setting of registration mark
Check the lines of registration mark
Test the registration mark sensor
Set the registration mark automatic detection
Set speed of the registration mark scan
Set the MARK SCAN Mode
Select the SCAN Mode of the sensor to scan the registration marks. Select according to the media condition.
Mode 1: Select when using a general medium of white background.
Mode 2: Select when using colored media or glossy media.
Mode 3:Select when the plotter cannot scan in Mode 1 or Mode 2 with a special material.
Use the "RECOMMENDED SETTINGS" function to checkthe guideline for selecting a SCAN Mode.
with "+" or "-".
marks and "-" for pale registration marks.
Set it to "+" when the contrast is large, and "-" when it is small.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/3) is displayed.
5-8