5
Press the [1] key (1), [2] key (2), or the [3] key (3).
6
(2/3).
7
Press the [COND/TEST] key.
It will return to default screen.
Supplement
Tool number and installed position
Tool 1: When using a tool installed behind
Tool 2: When using a tool attached to the
Tool 3: When using a tool attached in front of
For information on how to install the tool, see
"Attaching a Tool".
2-41
Tool Holder
(Backward: Half cut/Plotter pen)
Tool Holder
(Forward: Cutting out)
the tool holder
pen station with the 2-pen option of
this plotter
the tool holder