Rear View - GRAPHTEC FC9000 Series User Manual

Cross cut unit .........................Used for separating media or for crosscutting.
Pen station/Pen holder (option 2-pen type only)*
.........................A second pen is set.

Rear view

This will be explained in FC9000-140.
RS-232C interface
connector
USB interface
connector
Network (LAN) interface
connector
AC line inlet ............................. Inlet where the power cable is connected.
Push roller hold-down force switching lever
.........................Switches the hold-down force of the push roller to 3 stages of strong, medium
Media stocker .........................The stock shaft is set.
Stock shaft ..............................A roller that takes in roll media.
Stopper ....................................Keeps set roll media in place.
USB interface connector .......Used to connect the plotter to the computer with a USB interface cable.
RS-232C interface connector
.........................Used to connect the plotter to the computer with a RS-232C interface cable.
Network (LAN) Interface connector
.........................Used to connect this plotter with a network (LAN) I/F.
USB memory dedicated connector
................................................USB memory dedicated connector.
Stand .......................................A stand to put the machine on.
Basket ......................................The container for receiving the media.
* Pen station is an optional item. For details, please contact your dealer.
USB memory dedicated
connector
Basket
Stock shaft
Media sensors
Stopper
and weak.
It depends on the sales area. For details, please contact the distributor where
you purchased.
Push roller hold-down force
switching lever
1-5
AC line inlet
Stand
Media stocker