GRAPHTEC FC9000 Series User Manual page 106

It will copy in following order when ROTATE is set.
Data that includes registration marks cannot be copied.
Copy origin point
First cut
Origin point
Cross cut margin
Operation
1
Plot (cut) the data you want to copy once.
Cutting data is stored in the buffer memory.
2
Press the POSITION (
carriage to the position to copy.
3
Press the [COPY] key
COPY MODE screen is displayed.
Third copy
Second
First copy
copy
Cross cut
margin
Copy Copy
space space
It is cross-cut at this position.
) keys and move the tool
Supplement
Turning MEDIA CHANGE MODE on will
display the CHANGE MEDIA message each
time after a single cut.
"If the [ESC] key (QUIT COPY) is pressed,
copying will be suspended and it will return to
the default screen.
When exchanging media, the media selection
will be chosen from what was selected
before copying.
If there is no data in the buffer memory,
"There is no data for copying in the buffer" will
be displayed. Please send cutting data.
If too much data is sent from the buffer
will be displayed.
4-16