Preparing For Take-Up - GRAPHTEC FC9000 Series User Manual

Preparing for take-up

This section explains in the FC9000-140.
CAUTION
Deviations and errors may result if the stock shaft is misaligned when plotting begins.
Always open the basket during the take-up operation.
Due to the structure, the roll media is slacked by about 200 mm after the completion of the take-up operation.
Attaching (Setting the paper core)
1
both ends of the paper core for take-up as shown in the
* Secure the roll media so that there is no gap between the
skewing.
media to be taken up.
Paper core for take-up
18-10
Knob
Secure the roll media
so that there is no gap
and the paper core.