GRAPHTEC FC9000 Series User Manual page 314

2
Turn the plunger cap or the chuck in the counter-clockwise
direction to remove it from the plunger.
3
Remove the blade from inside the plunger cap or the chuck.
4
Take a new blade out of its pack. Insert the new blade into
the hole provided in the plunger cap or the chuck.
5
Insert the blade into the plunger cap or the chuck and attach
the plunger from above in that state.
6
Secure the plunger cap or the chuck by turning it clockwise.
CAUTION
<PHP33-CB09N-HS/PHP33-CB15N-HS>
Please fully insert the cutter blade straight into the plunger cap..
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter blade
several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
<PHP35-CB09-HS/PHP35-CB15-HS>
Please fully insert the cutter blade straight into the chuck.
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter blade
several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
15-4