GRAPHTEC FC9000 Series User Manual page 123

3
Press the [1] key (SCAN MODE).
SCAN MODE screen is displayed.
4
Press the [1] key (SCAN MODE).
SCAN MODE screen is displayed.
5
Press the POSITION (
Press the [ESC] key (PREVIOUS).
6
Press the [2] key (ADJUST LEVEL).
ADJUST LEVEL screen is displayed.
7
Press the POSITION (
setting value.
Press the [ESC] key (PREVIOUS).
8
(1/3).
9
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys and select the mode.
) keys and increase or decrease the
5-9
Supplement
It will return to ARMS SETTING screen without
changing the settings when you press the [ESC]
key (PREVIOUS).
Supplement
Mode 3 is -50 to 50.
Supplement
Press the [SLOW] key to select the setting
digits.
Supplement
It will return to ARMS SETTING screen (1/3)
without changing the settings when you press
the [ESC] key (CANCEL).