GRAPHTEC FC9000 Series User Manual page 145

Adjust with 3POINTS
If the loaded media is tilted as shown below, position of the scanned registration mark is shifted from the position
Difference in X
Difference in X
Original registration
mark position
Difference in Y
Adjust with 4POINTS
tilting of the X and Y axes and the distance between each of the registration marks. It will perform 2 axes warp
than other methods.
Data
Original registration mark position
Tilt
Difference in Y
First registration mark
Tilt
Third registration mark
Print
Image is printed tilted
and warped
Second registration mark
Cut
6-3