Table of Contents
Advertisement
When using Cutting Master 4
1
It's recommended that the cut design is created on a layer
different from the print design.
MARK TYPE 1
Cutting data
Step 3: Print design data.
After creating the design, print it on the media.
Supplement
Pay attention to the following when printing to prevent registration mark scan from failing when cutting.
Set the enlarge/shrink scale to 100%.
Set the printing position (center/lower left etc.) so that the positional relationship between the created document and the printed
result is the same.
Operation
3-
1
Print design data for printing and cutting.
When using Graphtec Pro Studio
1
Select the printer to use from the Print menu of Graphtec
Pro Studio and print the created data.
When using Cutting Master 4
1
Print using the Adobe Illustrator or CorelDRAW function.
Set the layer of cut data to Hide before printing.
MARK TYPE 2
14-6
Advertisement
Table of Contents
Troubleshooting
