Alignment Mark - GRAPHTEC FC9000 Series User Manual

13.2
Overview of Axis Adjustment
For
Move the tip of each tool to the appropriate point.

Alignment mark

The number of alignment marks is 2 points. The position of each alignment mark is as shown in the following
Example of axis adjustment
Plotting
reference
There is a misalignment between the X-Y axis and origin
point of the plotter and the media plotted.
Alignment with 2 points
1st point or origin point
Media that already cut and set again
point 2
Origin point
Reference of this plotter
2nd point
coordinate axes
(Origin point of the media already cut)
The misalignment of the X-Y axis and origin point is
13-4
New origin point