GRAPHTEC FC9000 Series User Manual page 339

6
Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
7
Move the tool carriage to print start position by pressing the
POSITION (
8
operate and press the [ENTER] key.
Selected page of the CONDITION LIST is printed.
9
It will return to READY status when the printing is completed.
10
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys.
Supplement
Press the [ESC] key (CANCEL CONDITION) to
return to the TEST screen without printing the
list.
Do not place you hand around the moving
areas. The tool carriage will start moving, so
Supplement
Load the media and repeat steps 6 to 8 to print
different page at this point.
16-17
CAUTION