I/F (Lan); Setting The Dhcp - GRAPHTEC FC9000 Series User Manual

9.3

I/F (LAN)

Set the network interface (LAN).
Supplement
When you change the settings of the network, the plotter is reset.
To connect through a network (LAN), it is necessary to set the following items.
Set the DHCP
Set the IP address
Set the subnet mask
Set the gateway
Display the MAC address

Setting the DHCP

please see the equipment manual, or consult the network administrator.
The default setting of DHCP is OFF.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/3) is displayed.
9-5