GRAPHTEC FC9000 Series User Manual page 162

7.4
Setting the Distance Adjust
DISTANCE ADJUST value corrects any deviation in the length of cut or plotted line segments, which occurs
Supplement
This setting will be saved even if the power is shut off.
Operation
1
Press the [COND/TEST] key.
CONDITION setting screen (1/3) is displayed.
2
Press the POSITION ( ) key.
CONDITION setting screen (3/3) is displayed.
3
Press the [1] key (DISTANCE ADJUST).
D. ADJ. screen is displayed.
4
Press the POSITION (
No.
) keys and select the CONDITION
7-12