New Holland CX720 Repair Manual page 2712

17. Apply thread locking compound type (1) (Loctite 242)
to bolts (1). Screw in twelve bolts (1) and tighten
them to a torque of 320 Nm (236 ft.lbs).
18. Install bearing (1).
Apply a load of 150 Kg (330 Lbs ) on the inner ring
of bearing (1) and turn final drive around the output
shaft to obtain bearing (1) is correctly seated.
Measure distance X between the inner ring of bear-
ing (1) and the upper flat surface of the output shaft.
IMPORTANT: Be sure the 12 bolts 1 (fig.16) are tightened
to torque before measuring distance X. Measure distance
X with the load applied on the bearing inner ring.
19. The required shimpack can be defined as follows:
shim pack = X - 0.35 mm (X - 0.014 in).
20. Install shim pack (5).
Install washer (4), lock washer (3) and three bolts (2).
Tighten bolts (2) to a torque of 320 Nm (236 ft.lbs)
and lock them with lock washer (3).
TRAVELLING - FRONT AXLE
2 4/7/2006
D.10.A / 58
16
ZDA4639A_936
17
ZDA4163B
18
ZDA4666A_937