New Holland CX720 Repair Manual page 2686

Final drive Wheel stud - Replace (D.10.A.42.60 - F.10.A.30)
CX720, CX740, CX760, CX780, CX820, CX840
1. Remove the traction wheel.
Install a suitable and safe support underneath the com-
bine traction axle to support the combine. Z016
2. Remove sleeve (1) at the final drive.
3. Turn the output shaft of the final drive until wheel bolt
(2) (the bolt to be replaced) is aligned with notch (3)
in the final drive housing.
Drive out wheel bolt (2).
Insert a new wheel bolt and pull it on its place with a
wheel nut.
NOTE: Make sure the notch on the wheel bolt is in line with
the step on the output shaft.
TRAVELLING - FRONT AXLE
CAUTION
2 4/7/2006
D.10.A / 32
1
ZDA4848A
2
ZDA4708A