New Holland CX720 Repair Manual page 2902

Upper shield - Remove (E.20.A.71 - F.10.A.10)
1. Set the ladder in the up position. Lock the ladder in
the up position by using a chain, large hose clamp or
other appropriate device at (1).
Support the ladder from above with a tow motor or
hoist.
2. Remove the cotter pin, washer and pivot pin (1) from
the lower strut connection.
NOTE: The ladder shown may not be identical to your par-
ticular model.
Substantial force is being exerted on the pivot pin by
the strut. Personal injury may result if the pin is not
removed cautiously. Z110
3. Turn out hardware (2) and carefully remove the lad-
der from the combine.
NOTE: The ladder is heavy and awkward. Use the proper
equipment to support the ladder while removing the mount-
ing blocks, 1.
BODY AND STRUCTURE - SHIELD
CAUTION
2 4/7/2006
E.20.A / 12
1
20015737
2
20015738
3
20015739