4.
Install gear (1).
Install washer (2).
5.
Heat bearing (4) to 80 °C (176 °F) and install it on the
input shaft.
Install washer (3).
Install lockwasher (2).
Install nut (1) and tighten to a torque of 150-170 N·m
(111-125 ft.lbs.).
Secure nut (1) by bending a lip of the lockwasher in
one of the notches of the nut.
POWER TRAIN - TRANSMISSION Mechanical
2 4/7/2006
C.20.B / 49
4
ZDA3413A
5
ZDA3406A