BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating system
5.
Take off under seat ventilation duct at (1). Turn out
cap screws (2) and (3). Detach electrical connector
(4).
6.
Remove hoses (1) Turn out water valve mounting
cap screws (2).
NOTE: When removing heater hoses, residual coolant will
drain.
7.
Disconnect ventilation duct (1) Turn out plenum cap
screw (2) Detach electrical connector (3) Remove the
four blower motor mounting cap screws, 4.
2 4/7/2006
E.40.B / 26
5
10008340_1036
6
10008341
7
10008346