New Holland CX720 Repair Manual page 2688

Final drive Input shaft - Remove (D.10.A.42.43 - F.10.A.10)
CX860, CX880
1. Drain the oil from the planetary final drive (Refer to
the Operator's Manual, section 4 "Lubrication and
Maintenance").
2. Remove the bolts (1) and remove the cover (2).
NOTE: The seal in the cover will be damaged when it is
removed.
3. Keep the shimpac (3) together with the cover and
remove the input shaft (4).
NOTE: The bearings on the input shaft will be damaged
when they are removed.
Next operation:
Final drive Input shaft - Assemble (D.10.A.42.43 - F.10.A.20).
TRAVELLING - FRONT AXLE
2 4/7/2006
D.10.A / 34
1
ZDA4663A
2
ZDA4664A