New Holland CX720 Repair Manual page 2580

13. Turn out cap screws (1) and remove the belt ten-
sioner from the combine. Store the tensioner in a
suitable location.
14. Loosen the straw chopper drive belt tensioning
spring (1) Lift the belt from the combine and store in
a suitable location.
15. Disconnect and cap the two low pressure hydraulic
pump lines (1).
NOTE: When disconnecting hydraulic lines, have a suit-
able container readily available to capture any residual hy-
draulic oil.
POWER TRAIN - PROCESS DRIVE Primary process drive
2 4/7/2006
C.50.B / 16
13
10012192
14
10012182_890
15
10012183_891