7.
Install shifting drive gear housing (3) and tighten four
special bolts (1) and bolt (2).
8.
Insert the shifting drive gear from the inside of the
gearbox and install the friction ring and circlip (1).
9.
Install electric motor (2).
Install bolts and washers (1).
NOTE: If necessary to change gears manually while as-
sembling the input shaft, the drive shaft and the differential
into the gearbox, wait for installing the electric motor until
the end.
POWER TRAIN - TRANSMISSION Mechanical
2 4/7/2006
C.20.B / 68
7
ZDA3346A_928
8
ZDA3347A
9
ZDA3345A