New Holland CX720 Repair Manual page 2692

8. Remove the planetary final drive housing (1) from the
output shaft (2).
NOTE: The bearing on the output shaft will be damaged
when it is removed.
NOTE: The seal in the planetary final drive housing will be
damaged when it is removed.
9. On the other planetary final drive housing, remove
the retaining ring (1) and the small sun gear.
NOTE: The small sun gear and the big sun gear are
marked. If for any reason the marks are not visible, apply
a mark on both sun gears before taking them apart.
10. Remove the retaining ring (2) and the big sun gear
with the bearings.
NOTE: Refer to Final drive Reducer, satellite and plan-
etary - Disassemble (D.10.A.42.50 - F.10.A.25) and Fi-
nal drive Reducer, satellite and planetary - Assemble
(D.10.A.42.50 - F.10.A.20) to disassemble and re-assem-
ble the sun gears .
TRAVELLING - FRONT AXLE
2 4/7/2006
D.10.A / 38
7
ZDA4357A
8
ZDA4356A
9
ZDA4354B