New Holland CX720 Repair Manual page 2576

PROCESS DRIVE Primary process drive - Remove (C.50.B -
F.10.A.10)
1. Support the left combine door open with an appropri-
ate lifting device.
2. Remove the nut and bolt (1) and allow the door
opener (2) to rest on the ground.
3. Turn off nut at (1), and disengage cable end from the
operating mechanism. Loosen the jam nut at (2).
Remove the four cap screws (3) and take the door
opener from the combine. Store the opener in a suit-
able location.
Carefully lower the door until it is vertical. Remove
the lifting gear used to support the door.
POWER TRAIN - PROCESS DRIVE Primary process drive
2 4/7/2006
C.50.B / 12
1
10012172
2
10012173
3
10012174