New Holland CX720 Repair Manual page 2918

4. Ladder Mount Installation
NOTE: When installing the rotating ladder mount, ensure
that one of the grease fittings (1) is in alignment with the
greasing decal (2).
5. Lift the ladder mount (1) into position against the plat-
form and secure using the six cap screws (2) previ-
ously removed.
Set the positioning rod (3) into place and install the
hardware previously removed at (4).
NOTE: The ladder mount is heavy and awkward. Personal
injury can occur if the mount is handled improperly.
6. Install the ladder (1) in accordance with the Front
Ladder Installation instructions.
BODY AND STRUCTURE - OPERATOR AND SERVICE PLATFORM
2 4/7/2006
E.30.A / 12
4
20015751
5
20015749_1506
6
20015746